BEARING-SINGAPORE (PTE)LTD.
BEARING-SINGAPORE (PTE)LTD.
Fersa Bearing   Gamet Bearing   ILJIN Bearing  
English
English
  • Home
  • Stock Categories
    • Fersa Bearing
    • Gamet Bearing
    • ILJIN Bearing
    • JNS Bearing
    • KBC Bearing
    • LS Bearing
    • NMB Bearing
    • NTN-SNR Bearing
    • PFI Bearing
    • PSL Bearing
    • RHP Bearing
    • Ruville Bearing
    • Samick Bearing
    • SIGMA Bearing
    • SNFA Bearing
    • Screw-down Bearings
    • Air compressor bearing
    • Air Conditioning Magnetic Clutch bearing
    • Atlas air compressor bearing
    • Timken 2788 Bearing
    • Timken 368 Bearing
    • Timken 399a Bearing
    • 6208 rsr Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Deep Groove Ball Bearings
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
    • Thk Linear Guide
  • Technical Articles
  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
✖

Home

Stock Categories

Technical Articles

Fersa Bearing

Gamet Bearing

ILJIN Bearing

Home>Products>NMB Bearing>9 mm x 17 mm x 4 mm NMB L-1790 deep groove ball bearings

  • 9 mm x 17 mm x 4 mm NMB L-1790 deep groove ball bearings
  • 9 mm x 17 mm x 4 mm NMB L-1790 deep groove ball bearings
  • 9 mm x 17 mm x 4 mm NMB L-1790 deep groove ball bearings
  • 9 mm x 17 mm x 4 mm NMB L-1790 deep groove ball bearings

NMB L-1790 MODELS

Need a CAD or 3D Model?

What is L-1790 bearing cross reference？
Contact NowWhatsAppBe Our Agent

9 mm x 17 mm x 4 mm NMB L-1790 deep groove ball bearings

category

NMB Bearing

NMB L-1790 Bearing SPECIFICATIONS

  • With over 10170 full-service stores, our 9 mm x 17 mm x 4 mm NMB L-1790 deep groove ball bearings inventory is extensive and our parts are BEARING-SINGAPORE (PTE)LTD. 2.5 mm fillet radius: priced right. within 24 9 mm x 17 mm x 4 mm hours. This helps you maximize your productivity by saving time and your hard-earned dollars.

  • NMB

  • L-1790

  • 95000
  • 95491
  • 95929
  • Imperial
  • 12.00 Kg
  • Stamped Steel
  • 124.943 mm
  • 234.975 mm
Download NMB L-1790 Spec Sheet
BEARING-SINGAPORE (PTE)LTD.

BEARING-SINGAPORE (PTE)LTD.China

  • BEARING-SINGAPORE (PTE)LTD.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

9 mm x 17 mm x 4 mm NMB L-1790 deep groove ball bearings Technology

  • 95000
  • 95491
  • 95929
  • Imperial
  • 12.00 Kg
  • Stamped Steel
  • 124.943 mm
  • 234.975 mm
  • 63.5 mm
  • 49.949 mm
  • 64.798 mm
  • 6.35 mm
  • 3.30 mm
  • 139.95 mm
  • 151.89 mm
  • 217.90 mm
  • 208.03 mm
  • 4.8 mm
  • 5.6 mm
  • -14 mm
  • 36700 lbf
  • 141000 lbf
  • 209000 lbf
  • 23200 lbf
  • 1.58
  • 0.37
  • 1.62
  • 453.9
  • 59.4
  • 0.132
9 mm x 17 mm x 4 mm NMB L-1790 deep groove ball bearings pdf

NMB L-1790 Specifications for 9 mm x 17 mm x 4 mm NMB L-1790 deep groove ball bearings

Sponsored products related to 9 mm x 17 mm x 4 mm NMB L-1790 deep groove ball bearings

No.BrandHBCLmZdD
22FC1790KOYO - 90 mm428 kN - - - 110 mm170 mm
ER1.45.1790.400-1SPPNISB150 mm - - - 14 mm142 mm1617 mm2027 mm
LF-1790NMB - 4 mm1,724 kN14,81 mm - - 9 mm17 mm
LF-1790ZZNMB - 5 mm1,724 kN15,34 mm - - 9 mm17 mm
L-1790NMB - 4 mm1,724 kN14,84 mm - - 9 mm17 mm
L-1790DDNMB - 5 mm1,724 kN15,34 mm - - 9 mm17 mm
L-1790ZZNMB - 5 mm1,724 kN15,34 mm - - 9 mm17 mm
260TQU807-BC1790 H1TIMKEN - - - - - - - -
SSLF1790 ZZRA1P25 SRLBEARINGS LIMITED - - - - - - - -
TAROL120/195JP-517905-E34AFAG BEARING - - - - - - - -
TAROL120/195TVP-517905B-E34DFAG BEARING - - - - - - - -

 

10 mm x 26 mm x 10 mm NMB RBT10E plain bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;
10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;
22 mm x 52 mm x 22 mm NMB HR22 plain bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;
4 mm x 9 mm x 2,5 mm NMB LF-940 deep groove ball bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;
3,175 mm x 7,938 mm x 3,571 mm NMB RIF-518ZZ deep groove ball bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;
1,397 mm x 4,762 mm x 2,779 mm NMB RIF-3ZZ deep groove ball bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;
12 mm x 25 mm x 12 mm NMB MBG12CR plain bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;
6 mm x 19 mm x 6 mm NMB 626SS deep groove ball bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;
12 mm x 25 mm x 12 mm NMB MBT12 plain bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;
3 mm x 6 mm x 2 mm NMB LF-630 deep groove ball bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;
28 mm x 50 mm x 28 mm NMB MBT28 plain bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;
6,35 mm x 15,875 mm x 4,978 mm NMB RF-4HH deep groove ball bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;
8 mm x 16 mm x 5 mm NMB LF-1680DD deep groove ball bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;
9 mm x 24 mm x 7 mm NMB 609 deep groove ball bearingsSeries:95000; Cone Part Number:95491; Cup Part Number:95929; Design Units:Imperial; Bearing Weight:12.00 Kg; Cage Type:Stamped Steel; d:124.943 mm; D:234.975 mm; B - Cone Width:63.5 mm; C - Cup Width:49.949 mm; B:64.798 mm; R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:139.95 mm; db - Cone Backface Backing Diameter:151.89 mm; Da - Cup Frontface Backing Diameter:217.90 mm; Db - Cup Backface Backing Diameter:208.03 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:5.6 mm; a - Effective Center Location3:-14 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; C0 - Static Radial Rating:209000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; K - Factor7:1.58; e - ISO Factor8:0.37; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway):453.9; G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132;

 

 

9 mm x 17 mm x 4 mm NMB L-1790 deep groove ball bearings Video

 

NMB Minebea L-1790ZZ RP0P25LY121 689ZZ 9*17*5mm

NMB Minebea L-1790DD SD28MTMNA1P24LY121 689ZZ 9*17*5mm Japan ball bearing. $6.98. + $3.80 Shipping. NMB Minebea L-1680HH MTRP5P24LY551 

L-1790ZZRA3P25LY | NMB Technologies

Print these specs. Category. Metric Bearing Series. Part Number. L-1790ZZRA3P25LY. Metric. Shielded. Bore Diameter. 9 [mm]. Outside Diameter. 17 [mm]

Metric L Series Minature Bearings Engineering Part Interchange

METRIC L SERIES MINIATURE BEARINGS. Part Number Interchange. This chart is intended as a reference only. The users should consult with the listed 

Bearing L-1790 (NMB) | Size and Specification | Bearings

Deep groove ball bearings L-1790. Bearing number : L-1790. Size (mm) : 9x17x4. Brand : NMB. Bore Diameter (mm) : 9. Outer Diameter (mm) : 17. Width (mm) : 

9 mm x 17 mm x 5 mm NMB L-1790DD deep groove ball

9 mm x 17 mm x 5 mm NMB L-1790DD deep groove ball bearings. Our highly-skilled and factory-trained service experts have NTN Bearing Brazilian Bearings 

NMB Bearings from National Precision Bearing

NMB Miniature Bearings from NPB. ... L series radial open & flanged open · L series radial shielded & flanged shielded · L series part interchange · R series radial ... National Precision Bearing is the largest stocking distributor of NMB brand miniature and ... 0.3543, 9, 0.6693, 17, DDL1790 · S689, 0.1575, 4, —, —, 0.1969, 5

L-1790 ZZ | Online Catalog | Bearings | Products | NOC

Deep groove ball bearings. Single row, without filling slot. Complete. NMB L-1790 ZZ, L-1790-ZZ, L-1790ZZ, L1790ZZ

L-1790ZZ R NMB Minebea • ABF Store

Product properties. Availability 0 pcs; Brand NMB Minebea; Item Number L-1790ZZ R NMB Minebea; Technical details (ZZ R) ZZ=2Z (SKF)=TWO SEALS, 

NMB L-1790 INTERCHANGE

NMB Bearing Part series L-1790 is a potential replacement for these common bearing part numbers:

  • L-1790

  • L-1790

  • L-1790

  • L-1790

  • L-1790

  • L-1790

  • L-1790

  • L-1790

Contact Us

BEARING-SINGAPORE (PTE)LTD.
AddressRm.727, 5, Jungang-Daero 775 Beon-Gil, Busanjin-Gu, Busan, 47221, Korea
Phone(Working Time)82-2-220-3666
Fax
  • BEARING-SINGAPORE (PTE)LTD.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

NMB L-1790 Technical Articles

Are wheel bearings hard to replace?
How hard is it to change a wheel bearing? : MechanicAdviceJun 6, 2018 — How hard is it to change a wheel bearing? 2002 Silverado. Im not a mechanic but i can usually figure most things out on my own. I  How to Replace a Front Wheel...
Can a bad axle sound like a bad wheel bearing?
CV joint or Bearing? - Maintenance/Repairs - Car TalkJul 4, 2016 — The noise reminds me of a bad wheel bearing or a tire problem. The faster you go the more The CV joint half shaft does seem a bit loose. But as I recall, a failing This sounds...
How do you fasten a bearing?
Bearing installation and removal basics | Processing MagazineNov 9, 2017 — Installing a radial ball or roller bearing properly is critical to achieve the full service life of the component. Never attach a pipe to the handle MiHow2 - Koyo -...

NMB Bearing CATEGORIES

  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
  • JNS Bearing
  • KBC Bearing
  • LS Bearing
  • NMB Bearing
  • NTN-SNR Bearing
  • PFI Bearing
  • PSL Bearing
  • RHP Bearing
  • Ruville Bearing
  • Samick Bearing
  • SIGMA Bearing
  • SNFA Bearing
  • Screw-down Bearings
  • Air compressor bearing
  • Air Conditioning Magnetic Clutch bearing
  • Atlas air compressor bearing
  • Timken 2788 Bearing
  • Timken 368 Bearing
  • Timken 399a Bearing
  • 6208 rsr Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Kaydon Slewing Bearing
  • Bearing Slewing Ring
  • Single-Row Cylindrical Roller Bearings
  • Single-Row Deep Groove Ball Bearings
  • Deep Groove Ball Bearings
  • Cylindrical Roller Bearings
  • Bearings For Metric And Inch Shaft Sizes
  • Thk Miniature Linear Guide
  • Thk Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • Thk Linear Bearings And Rails
  • Thk Linear Motion
  • Thk Linear Guide
More

Customers Who Viewed NMB L-1790 Bearing Also Viewed

  • 1,397 mm x 4,762 mm x 2,779 mm NMB RIF-3ZZ deep groove ball bearings
  • 12 mm x 25 mm x 12 mm NMB MBT12 plain bearings
  • 3 mm x 6 mm x 2 mm NMB LF-630 deep groove ball bearings
  • 28 mm x 50 mm x 28 mm NMB MBT28 plain bearings
  • 10 mm x 26 mm x 10 mm NMB RBT10E plain bearings
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

BEARING-SINGAPORE (PTE)LTD.. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Fersa Bearing
    • Gamet Bearing
    • ILJIN Bearing
    • JNS Bearing
    • KBC Bearing
    • LS Bearing
    • NMB Bearing
    • NTN-SNR Bearing
    • PFI Bearing
    • PSL Bearing
    • RHP Bearing
    • Ruville Bearing
    • Samick Bearing
    • SIGMA Bearing
    • SNFA Bearing
    • Screw-down Bearings
    • Air compressor bearing
    • Air Conditioning Magnetic Clutch bearing
    • Atlas air compressor bearing
    • Timken 2788 Bearing
    • Timken 368 Bearing
    • Timken 399a Bearing
    • 6208 rsr Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Deep Groove Ball Bearings
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
    • Thk Linear Guide
  • Technical Articles
  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
✖

Home

Stock Categories

Technical Articles

Fersa Bearing

Gamet Bearing

ILJIN Bearing

Contact Us