BEARING-SINGAPORE (PTE)LTD.
BEARING-SINGAPORE (PTE)LTD.
Fersa Bearing   Gamet Bearing   ILJIN Bearing  
English
English
  • Home
  • Stock Categories
    • Fersa Bearing
    • Gamet Bearing
    • ILJIN Bearing
    • JNS Bearing
    • KBC Bearing
    • LS Bearing
    • NMB Bearing
    • NTN-SNR Bearing
    • PFI Bearing
    • PSL Bearing
    • RHP Bearing
    • Ruville Bearing
    • Samick Bearing
    • SIGMA Bearing
    • SNFA Bearing
    • Screw-down Bearings
    • Air compressor bearing
    • Air Conditioning Magnetic Clutch bearing
    • Atlas air compressor bearing
    • Timken 2788 Bearing
    • Timken 368 Bearing
    • Timken 399a Bearing
    • 6208 rsr Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Deep Groove Ball Bearings
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
    • Thk Linear Guide
  • Technical Articles
  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
✖

Home

Stock Categories

Technical Articles

Fersa Bearing

Gamet Bearing

ILJIN Bearing

Home>Products>NMB Bearing>1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove ball bearings

  • 1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove ball bearings
  • 1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove ball bearings
  • 1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove ball bearings
  • 1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove ball bearings

NMB RIF-21/2 MODELS

Need a CAD or 3D Model?

What is RIF-21/2 bearing interchange？
Contact NowWhatsAppBe Our Agent

1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove ball bearings

category

NMB Bearing

NMB RIF-21/2 Bearing SPECIFICATIONS

  • With over 10170 1,191 mm x 3,967 mm x 1,588 mm full-service stores, our 1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove ball bearings inventory is extensive and our parts are priced right. within 24 hours. This helps BEARING-SINGAPORE (PTE)LTD. you maximize your productivity by saving 25mm Inside Diameter (mm): time and your hard-earned dollars.

  • NMB

  • RIF-21/2

  • 13600
  • 13687
  • 13621
  • Imperial
  • 0.30 Kg
  • Stamped Steel
  • 38.1 mm
  • 69.012 mm
Download NMB RIF-21/2 Spec Sheet
BEARING-SINGAPORE (PTE)LTD.

BEARING-SINGAPORE (PTE)LTD.China

  • BEARING-SINGAPORE (PTE)LTD.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove ball bearings Technology

  • 13600
  • 13687
  • 13621
  • Imperial
  • 0.30 Kg
  • Stamped Steel
  • 38.1 mm
  • 69.012 mm
  • 19.050 mm
  • 15.083 mm
  • 19.050 mm
  • 2.030 mm
  • 2.29 mm
  • 42.93 mm
  • 46.48 mm
  • 66.00 mm
  • 60.96 mm
  • 1.3 mm
  • 0.5 mm
  • -3 mm
  • 3920 lbf
  • 15100 lbf
  • 15300 lbf
  • 2700 lbf
  • 1.45
  • 0.4
  • 1.49
  • 20.7
  • 10.9
  • 0.0713
1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove ball bearings pdf

NMB RIF-21/2 Specifications for 1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove ball bearings

Sponsored products related to 1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove ball bearings

No.BranddDBCLC1D1L1
RIF-21/2ZZNMB1,191 mm3,967 mm2,38 mm0,158 kN0,135 mm0,79 mm5,16 mm0,081 mm
RIF-21/2NMB1,191 mm3,967 mm1,588 mm0,158 kN0,124 mm0,33 mm5,16 mm0,081 mm

 

1,397 mm x 4,762 mm x 2,779 mm NMB RIF-3ZZ deep groove ball bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;
4 mm x 9 mm x 2,5 mm NMB LF-940 deep groove ball bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;
8 mm x 16 mm x 5 mm NMB LF-1680DD deep groove ball bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;
12 mm x 25 mm x 12 mm NMB MBT12 plain bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;
6,35 mm x 15,875 mm x 4,978 mm NMB RF-4HH deep groove ball bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;
22 mm x 52 mm x 22 mm NMB HR22 plain bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;
28 mm x 50 mm x 28 mm NMB MBT28 plain bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;
3,175 mm x 7,938 mm x 3,571 mm NMB RIF-518ZZ deep groove ball bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;
10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;
3 mm x 6 mm x 2 mm NMB LF-630 deep groove ball bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;
6 mm x 19 mm x 6 mm NMB 626SS deep groove ball bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;
12 mm x 25 mm x 12 mm NMB MBG12CR plain bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;
10 mm x 26 mm x 10 mm NMB RBT10E plain bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;
9 mm x 24 mm x 7 mm NMB 609 deep groove ball bearingsSeries:13600; Cone Part Number:13687; Cup Part Number:13621; Design Units:Imperial; Bearing Weight:0.30 Kg; Cage Type:Stamped Steel; d:38.1 mm; D:69.012 mm; B - Cone Width:19.050 mm; C - Cup Width:15.083 mm; B:19.050 mm; R - Cone Backface To Clear Radius1:2.030 mm; r - Cup Backface To Clear Radius2:2.29 mm; da - Cone Frontface Backing Diameter:42.93 mm; db - Cone Backface Backing Diameter:46.48 mm; Da - Cup Frontface Backing Diameter:66.00 mm; Db - Cup Backface Backing Diameter:60.96 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; C0 - Static Radial Rating:15300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0713;

 

 

1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove ball bearings Video

 

Bearing RIF-21/2 (NMB) | Size and Specification | Bearings Online

Deep groove ball bearings RIF-21/2. Bearing number : RIF-21/2. Size (mm) : 1.191x3.967x1.588. Brand : NMB. Bore Diameter (mm) : 1,191. Outer Diameter 

RIF-21/2 | Online Catalog | Bearings | Products | NOC

Deep groove ball bearings. Single row, without filling slot. Complete. NMB RIF-2 1/2, RIF-2-1/2, RIF-21/2, RIF212

1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove

1,191 mm x 3,967 mm x 1,588 mm NMB R... Bearing No. RIF-21/2. Size. 1.191x3.967x1.588 mm. Bore Diameter. 1,191 mm. Outer Diameter. 3,967 mm. Width

1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove ball

170 Million used 1191 mm x 3967 mm x 1588 mm NMB RIF-21/2 deep groove ball bearings instantly searchable. Shop our large selection of parts based on 

RIF-21-2 Inch Series Bearings - NMB Technologies

RIF-21-2. Inch Series Bearings. NMB Technologies Corporation - A MinebeaMitsumi Group Company - 39830 Grand River Avenue - Novi, MI 48375 

RIF-21-2 Flanged Open Miniature Ball Bearings | NMB

Print these specs. Category. Inch Series Bearings. Part Number. RIF-21-2. Inch. Flanged Open. Bore Diameter. 1.191 [mm]. Outside Diameter. 3.968 [mm]. Width

Buy 1,191 mm x 3,967 mm x 1,588 mm NMB RIF-21/2 deep groove

High Quality 1191 mm x 3967 mm x 1588 mm NMB RIF-21/2 deep groove ball bearings. Competitive 0.215 Fatigue Load Rating (kN): NMB Bearing 25mm 

NMB RIF-21/2 bearing,RIF-21/2 Deep Groove Ball Bearings

We has been built up long-term cooperation with NMB company, could make a bulk order of the RIF-21/2 Which NMB RIF-21/2 is the most authentic, must 

NMB RIF-21/2 INTERCHANGE

NMB Bearing Part series RIF-21/2 is a potential replacement for these common bearing part numbers:

  • RIF-21/2

  • RIF-21/2

  • RIF-21/2

  • RIF-21/2

  • RIF-21/2

  • RIF-21/2

  • RIF-21/2

  • RIF-21/2

Contact Us

BEARING-SINGAPORE (PTE)LTD.
AddressRm.727, 5, Jungang-Daero 775 Beon-Gil, Busanjin-Gu, Busan, 47221, Korea
Phone(Working Time)82-2-220-3666
Fax
  • BEARING-SINGAPORE (PTE)LTD.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

NMB RIF-21/2 Technical Articles

Are wheel bearings hard to replace?
How hard is it to change a wheel bearing? : MechanicAdviceJun 6, 2018 — How hard is it to change a wheel bearing? 2002 Silverado. Im not a mechanic but i can usually figure most things out on my own. I  How to Replace a Front Wheel...
Can a bad axle sound like a bad wheel bearing?
CV joint or Bearing? - Maintenance/Repairs - Car TalkJul 4, 2016 — The noise reminds me of a bad wheel bearing or a tire problem. The faster you go the more The CV joint half shaft does seem a bit loose. But as I recall, a failing This sounds...
How do you fasten a bearing?
Bearing installation and removal basics | Processing MagazineNov 9, 2017 — Installing a radial ball or roller bearing properly is critical to achieve the full service life of the component. Never attach a pipe to the handle MiHow2 - Koyo -...

NMB Bearing CATEGORIES

  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
  • JNS Bearing
  • KBC Bearing
  • LS Bearing
  • NMB Bearing
  • NTN-SNR Bearing
  • PFI Bearing
  • PSL Bearing
  • RHP Bearing
  • Ruville Bearing
  • Samick Bearing
  • SIGMA Bearing
  • SNFA Bearing
  • Screw-down Bearings
  • Air compressor bearing
  • Air Conditioning Magnetic Clutch bearing
  • Atlas air compressor bearing
  • Timken 2788 Bearing
  • Timken 368 Bearing
  • Timken 399a Bearing
  • 6208 rsr Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Kaydon Slewing Bearing
  • Bearing Slewing Ring
  • Single-Row Cylindrical Roller Bearings
  • Single-Row Deep Groove Ball Bearings
  • Deep Groove Ball Bearings
  • Cylindrical Roller Bearings
  • Bearings For Metric And Inch Shaft Sizes
  • Thk Miniature Linear Guide
  • Thk Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • Thk Linear Bearings And Rails
  • Thk Linear Motion
  • Thk Linear Guide
More

Customers Who Viewed NMB RIF-21/2 Bearing Also Viewed

  • 1,397 mm x 4,762 mm x 2,779 mm NMB RIF-3ZZ deep groove ball bearings
  • 12 mm x 25 mm x 12 mm NMB MBT12 plain bearings
  • 3 mm x 6 mm x 2 mm NMB LF-630 deep groove ball bearings
  • 28 mm x 50 mm x 28 mm NMB MBT28 plain bearings
  • 10 mm x 26 mm x 10 mm NMB RBT10E plain bearings
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

BEARING-SINGAPORE (PTE)LTD.. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Fersa Bearing
    • Gamet Bearing
    • ILJIN Bearing
    • JNS Bearing
    • KBC Bearing
    • LS Bearing
    • NMB Bearing
    • NTN-SNR Bearing
    • PFI Bearing
    • PSL Bearing
    • RHP Bearing
    • Ruville Bearing
    • Samick Bearing
    • SIGMA Bearing
    • SNFA Bearing
    • Screw-down Bearings
    • Air compressor bearing
    • Air Conditioning Magnetic Clutch bearing
    • Atlas air compressor bearing
    • Timken 2788 Bearing
    • Timken 368 Bearing
    • Timken 399a Bearing
    • 6208 rsr Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Deep Groove Ball Bearings
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
    • Thk Linear Guide
  • Technical Articles
  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
✖

Home

Stock Categories

Technical Articles

Fersa Bearing

Gamet Bearing

ILJIN Bearing

Contact Us