BEARING-SINGAPORE (PTE)LTD.
BEARING-SINGAPORE (PTE)LTD.
Fersa Bearing   Gamet Bearing   ILJIN Bearing  
English
English
  • Home
  • Stock Categories
    • Fersa Bearing
    • Gamet Bearing
    • ILJIN Bearing
    • JNS Bearing
    • KBC Bearing
    • LS Bearing
    • NMB Bearing
    • NTN-SNR Bearing
    • PFI Bearing
    • PSL Bearing
    • RHP Bearing
    • Ruville Bearing
    • Samick Bearing
    • SIGMA Bearing
    • SNFA Bearing
    • Screw-down Bearings
    • Air compressor bearing
    • Air Conditioning Magnetic Clutch bearing
    • Atlas air compressor bearing
    • Timken 2788 Bearing
    • Timken 368 Bearing
    • Timken 399a Bearing
    • 6208 rsr Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Deep Groove Ball Bearings
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
    • Thk Linear Guide
  • Technical Articles
  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
✖

Home

Stock Categories

Technical Articles

Fersa Bearing

Gamet Bearing

ILJIN Bearing

Home>Products>NMB Bearing>10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings

  • 10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings
  • 10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings
  • 10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings
  • 10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings

NMB L-1910 MODELS

Need a CAD or 3D Model?

What is L-1910 bearing cross reference？
Contact NowWhatsAppBe Our Agent

10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings

category

NMB Bearing

NMB L-1910 Bearing SPECIFICATIONS

  • Our highly-skilled and factory-trained service experts have the resources to BEARING-SINGAPORE (PTE)LTD. help you with all your 10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings 85 Dynamic Load Rating (kN): needs - including 10 mm x 19 mm x 5 mm routine maintenance, major repairs, warranty service, and NMB Bearing 3.55 Fatigue Load Rating (kN): equipment inspections.

  • NMB

  • L-1910

  • JP17000C
  • KJP17049
  • METRIC
  • Stamped Steel
  • 98800 lbf
  • 25600 lbf
  • 170 mm
  • 30.000 mm
Download NMB L-1910 Spec Sheet
BEARING-SINGAPORE (PTE)LTD.

BEARING-SINGAPORE (PTE)LTD.China

  • BEARING-SINGAPORE (PTE)LTD.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings Technology

  • JP17000C
  • KJP17049
  • METRIC
  • Stamped Steel
  • 98800 lbf
  • 25600 lbf
  • 170 mm
  • 30.000 mm
  • 221.7 mm
  • 209.4 mm
  • 3.050 mm
  • 179 mm
  • 184 mm
  • 4.8 mm
  • 2.8 mm
  • 13 mm
  • 65400 N
  • 252000 N
  • 436000 N
  • 51700 N
  • 1.27
  • 361.9
  • 156.4
  • 0.123
10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings pdf

NMB L-1910 Specifications for 10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings

Sponsored products related to 10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings

No.BranddDCBFwC0EwD3
YB 1910IKO30,16238,1 mm28,4 kN - 30,162 mm53,6 kN - -
Y1910KOYO30,16238,1 mm22,7 kN - 30,162 mm46,5 kN - -
Y-1910NSK30,16238,1 mm26,5 kN - 30,162 mm - - -
VE141910AB1KOYO1419 - 9,8 mm14 mm - 19 mm -
713619100FAG - - - - - - - -
B-1910NSK30,16238,1 mm23 kN - 30,162 mm - - -
W 61910 RSKF50 mm72 mm2.5 mm12 mm - - - -
W 61910 R-2ZSKF50 mm72 mm12,5 kN12 mm - 11,6 kN - 75 mm
W 61910-2RS1SKF50 mm72 mm - 12 mm - - - -
W 61910-2RZSKF50 mm72 mm - 12 mm - - - -
W 61910-2ZSKF50 mm72 mm - 12 mm - - - -

 

10 mm x 26 mm x 10 mm NMB RBT10E plain bearingsSeries:JP17000C; Cone Part Number:KJP17049; Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:98800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25600 lbf; d:170 mm; B - Cone Width:30.000 mm; WPD:221.7 mm; DD:209.4 mm; R - Cone Backface To Clear Radius3:3.050 mm; da - Cone Frontface Backing Diameter:179 mm; db - Cone Backface Backing Diameter:184 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; a - Effective Center Location4:13 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:65400 N; C1 - Dynamic Radial Rating (1 million revolutions)6:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:51700 N; K - Factor8:1.27; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.123;
6 mm x 19 mm x 6 mm NMB 626SS deep groove ball bearingsSeries:JP17000C; Cone Part Number:KJP17049; Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:98800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25600 lbf; d:170 mm; B - Cone Width:30.000 mm; WPD:221.7 mm; DD:209.4 mm; R - Cone Backface To Clear Radius3:3.050 mm; da - Cone Frontface Backing Diameter:179 mm; db - Cone Backface Backing Diameter:184 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; a - Effective Center Location4:13 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:65400 N; C1 - Dynamic Radial Rating (1 million revolutions)6:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:51700 N; K - Factor8:1.27; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.123;
3 mm x 6 mm x 2 mm NMB LF-630 deep groove ball bearingsSeries:JP17000C; Cone Part Number:KJP17049; Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:98800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25600 lbf; d:170 mm; B - Cone Width:30.000 mm; WPD:221.7 mm; DD:209.4 mm; R - Cone Backface To Clear Radius3:3.050 mm; da - Cone Frontface Backing Diameter:179 mm; db - Cone Backface Backing Diameter:184 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; a - Effective Center Location4:13 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:65400 N; C1 - Dynamic Radial Rating (1 million revolutions)6:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:51700 N; K - Factor8:1.27; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.123;
6,35 mm x 15,875 mm x 4,978 mm NMB RF-4HH deep groove ball bearingsSeries:JP17000C; Cone Part Number:KJP17049; Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:98800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25600 lbf; d:170 mm; B - Cone Width:30.000 mm; WPD:221.7 mm; DD:209.4 mm; R - Cone Backface To Clear Radius3:3.050 mm; da - Cone Frontface Backing Diameter:179 mm; db - Cone Backface Backing Diameter:184 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; a - Effective Center Location4:13 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:65400 N; C1 - Dynamic Radial Rating (1 million revolutions)6:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:51700 N; K - Factor8:1.27; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.123;
12 mm x 25 mm x 12 mm NMB MBG12CR plain bearingsSeries:JP17000C; Cone Part Number:KJP17049; Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:98800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25600 lbf; d:170 mm; B - Cone Width:30.000 mm; WPD:221.7 mm; DD:209.4 mm; R - Cone Backface To Clear Radius3:3.050 mm; da - Cone Frontface Backing Diameter:179 mm; db - Cone Backface Backing Diameter:184 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; a - Effective Center Location4:13 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:65400 N; C1 - Dynamic Radial Rating (1 million revolutions)6:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:51700 N; K - Factor8:1.27; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.123;
9 mm x 24 mm x 7 mm NMB 609 deep groove ball bearingsSeries:JP17000C; Cone Part Number:KJP17049; Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:98800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25600 lbf; d:170 mm; B - Cone Width:30.000 mm; WPD:221.7 mm; DD:209.4 mm; R - Cone Backface To Clear Radius3:3.050 mm; da - Cone Frontface Backing Diameter:179 mm; db - Cone Backface Backing Diameter:184 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; a - Effective Center Location4:13 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:65400 N; C1 - Dynamic Radial Rating (1 million revolutions)6:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:51700 N; K - Factor8:1.27; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.123;
1,397 mm x 4,762 mm x 2,779 mm NMB RIF-3ZZ deep groove ball bearingsSeries:JP17000C; Cone Part Number:KJP17049; Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:98800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25600 lbf; d:170 mm; B - Cone Width:30.000 mm; WPD:221.7 mm; DD:209.4 mm; R - Cone Backface To Clear Radius3:3.050 mm; da - Cone Frontface Backing Diameter:179 mm; db - Cone Backface Backing Diameter:184 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; a - Effective Center Location4:13 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:65400 N; C1 - Dynamic Radial Rating (1 million revolutions)6:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:51700 N; K - Factor8:1.27; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.123;
12 mm x 25 mm x 12 mm NMB MBT12 plain bearingsSeries:JP17000C; Cone Part Number:KJP17049; Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:98800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25600 lbf; d:170 mm; B - Cone Width:30.000 mm; WPD:221.7 mm; DD:209.4 mm; R - Cone Backface To Clear Radius3:3.050 mm; da - Cone Frontface Backing Diameter:179 mm; db - Cone Backface Backing Diameter:184 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; a - Effective Center Location4:13 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:65400 N; C1 - Dynamic Radial Rating (1 million revolutions)6:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:51700 N; K - Factor8:1.27; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.123;
4 mm x 9 mm x 2,5 mm NMB LF-940 deep groove ball bearingsSeries:JP17000C; Cone Part Number:KJP17049; Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:98800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25600 lbf; d:170 mm; B - Cone Width:30.000 mm; WPD:221.7 mm; DD:209.4 mm; R - Cone Backface To Clear Radius3:3.050 mm; da - Cone Frontface Backing Diameter:179 mm; db - Cone Backface Backing Diameter:184 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; a - Effective Center Location4:13 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:65400 N; C1 - Dynamic Radial Rating (1 million revolutions)6:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:51700 N; K - Factor8:1.27; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.123;
28 mm x 50 mm x 28 mm NMB MBT28 plain bearingsSeries:JP17000C; Cone Part Number:KJP17049; Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:98800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25600 lbf; d:170 mm; B - Cone Width:30.000 mm; WPD:221.7 mm; DD:209.4 mm; R - Cone Backface To Clear Radius3:3.050 mm; da - Cone Frontface Backing Diameter:179 mm; db - Cone Backface Backing Diameter:184 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; a - Effective Center Location4:13 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:65400 N; C1 - Dynamic Radial Rating (1 million revolutions)6:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:51700 N; K - Factor8:1.27; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.123;
8 mm x 16 mm x 5 mm NMB LF-1680DD deep groove ball bearingsSeries:JP17000C; Cone Part Number:KJP17049; Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:98800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25600 lbf; d:170 mm; B - Cone Width:30.000 mm; WPD:221.7 mm; DD:209.4 mm; R - Cone Backface To Clear Radius3:3.050 mm; da - Cone Frontface Backing Diameter:179 mm; db - Cone Backface Backing Diameter:184 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; a - Effective Center Location4:13 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:65400 N; C1 - Dynamic Radial Rating (1 million revolutions)6:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:51700 N; K - Factor8:1.27; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.123;
3,175 mm x 7,938 mm x 3,571 mm NMB RIF-518ZZ deep groove ball bearingsSeries:JP17000C; Cone Part Number:KJP17049; Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:98800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25600 lbf; d:170 mm; B - Cone Width:30.000 mm; WPD:221.7 mm; DD:209.4 mm; R - Cone Backface To Clear Radius3:3.050 mm; da - Cone Frontface Backing Diameter:179 mm; db - Cone Backface Backing Diameter:184 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; a - Effective Center Location4:13 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:65400 N; C1 - Dynamic Radial Rating (1 million revolutions)6:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:51700 N; K - Factor8:1.27; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.123;
22 mm x 52 mm x 22 mm NMB HR22 plain bearingsSeries:JP17000C; Cone Part Number:KJP17049; Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:98800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25600 lbf; d:170 mm; B - Cone Width:30.000 mm; WPD:221.7 mm; DD:209.4 mm; R - Cone Backface To Clear Radius3:3.050 mm; da - Cone Frontface Backing Diameter:179 mm; db - Cone Backface Backing Diameter:184 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; a - Effective Center Location4:13 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:65400 N; C1 - Dynamic Radial Rating (1 million revolutions)6:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:51700 N; K - Factor8:1.27; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.123;

 

 

10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings Video

 

Buy 10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings

What is 5.5 Nm Recommended tightening torque for set screw the best place 10 mm x 19 mm x 5 mm 68 mm L to buy 10 mm x 19 mm x 5 mm NMB L-1910 deep 

Buy 10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings

What is the best place to buy 10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearings online? NMB Bearing Manufacturing BEARING-SINGAPORE 

10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball

10 mm x 19 mm x 5 mm NMB L-1910 deep... Bearing No. L-1910. Size. 10x19x5 mm. Bore Diameter. 10 mm. Outer Diameter. 19 mm. Width. 5 mm d. 10 mm. D

L-1910 ZZ | Online Catalog | Bearings | Products | NOC

Deep groove ball bearings. Single row, without filling slot. Complete. NMB L-1910 ZZ, L-1910-ZZ, L-1910ZZ, L1910ZZ

l-1910 nmb bearing suppliers - Alibaba

L-1910 Nmb Bearing, L-1910 Nmb Bearing Suppliers Directory - Find variety L-1910 Nmb Bearing Suppliers, Manufacturers, Companies from around the World 

L-1910KKY05 | NMB Technologies

L-1910KKY05. Metric. Shielded. Bore Diameter. 10 [mm]. Outside Diameter. 19 [mm]. Width. 5 [mm]. Bore Diameter. 0.3937 [in]. Outside Diameter. 0.748 [in]

Deep groove ball bearings L-1910 size(mm): 10*19*5 NMB - www

Date: 2017-07-10. Deep groove ball bearings L-1910 size(mm): 10*19*5 NMB. Bearing L-1910. Deep groove ball bearings L-1910. Bearing number : L-1910

Bearing L-1910 (NMB) | Size and Specification | Bearings

Deep groove ball bearings L-1910. Bearing number : L-1910. Size (mm) : 10x19x5. Brand : NMB. Bore Diameter (mm) : 10. Outer Diameter (mm) : 19

NMB L-1910 INTERCHANGE

NMB Bearing Part series L-1910 is a potential replacement for these common bearing part numbers:

  • L-1910

  • L-1910

  • L-1910

  • L-1910

  • L-1910

  • L-1910

  • L-1910

  • L-1910

Contact Us

BEARING-SINGAPORE (PTE)LTD.
AddressRm.727, 5, Jungang-Daero 775 Beon-Gil, Busanjin-Gu, Busan, 47221, Korea
Phone(Working Time)82-2-220-3666
Fax
  • BEARING-SINGAPORE (PTE)LTD.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

NMB L-1910 Technical Articles

Are wheel bearings hard to replace?
How hard is it to change a wheel bearing? : MechanicAdviceJun 6, 2018 — How hard is it to change a wheel bearing? 2002 Silverado. Im not a mechanic but i can usually figure most things out on my own. I  How to Replace a Front Wheel...
Can a bad axle sound like a bad wheel bearing?
CV joint or Bearing? - Maintenance/Repairs - Car TalkJul 4, 2016 — The noise reminds me of a bad wheel bearing or a tire problem. The faster you go the more The CV joint half shaft does seem a bit loose. But as I recall, a failing This sounds...
How do you fasten a bearing?
Bearing installation and removal basics | Processing MagazineNov 9, 2017 — Installing a radial ball or roller bearing properly is critical to achieve the full service life of the component. Never attach a pipe to the handle MiHow2 - Koyo -...

NMB Bearing CATEGORIES

  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
  • JNS Bearing
  • KBC Bearing
  • LS Bearing
  • NMB Bearing
  • NTN-SNR Bearing
  • PFI Bearing
  • PSL Bearing
  • RHP Bearing
  • Ruville Bearing
  • Samick Bearing
  • SIGMA Bearing
  • SNFA Bearing
  • Screw-down Bearings
  • Air compressor bearing
  • Air Conditioning Magnetic Clutch bearing
  • Atlas air compressor bearing
  • Timken 2788 Bearing
  • Timken 368 Bearing
  • Timken 399a Bearing
  • 6208 rsr Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Kaydon Slewing Bearing
  • Bearing Slewing Ring
  • Single-Row Cylindrical Roller Bearings
  • Single-Row Deep Groove Ball Bearings
  • Deep Groove Ball Bearings
  • Cylindrical Roller Bearings
  • Bearings For Metric And Inch Shaft Sizes
  • Thk Miniature Linear Guide
  • Thk Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • Thk Linear Bearings And Rails
  • Thk Linear Motion
  • Thk Linear Guide
More

Customers Who Viewed NMB L-1910 Bearing Also Viewed

  • 1,397 mm x 4,762 mm x 2,779 mm NMB RIF-3ZZ deep groove ball bearings
  • 12 mm x 25 mm x 12 mm NMB MBT12 plain bearings
  • 3 mm x 6 mm x 2 mm NMB LF-630 deep groove ball bearings
  • 28 mm x 50 mm x 28 mm NMB MBT28 plain bearings
  • 10 mm x 26 mm x 10 mm NMB RBT10E plain bearings
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

BEARING-SINGAPORE (PTE)LTD.. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Fersa Bearing
    • Gamet Bearing
    • ILJIN Bearing
    • JNS Bearing
    • KBC Bearing
    • LS Bearing
    • NMB Bearing
    • NTN-SNR Bearing
    • PFI Bearing
    • PSL Bearing
    • RHP Bearing
    • Ruville Bearing
    • Samick Bearing
    • SIGMA Bearing
    • SNFA Bearing
    • Screw-down Bearings
    • Air compressor bearing
    • Air Conditioning Magnetic Clutch bearing
    • Atlas air compressor bearing
    • Timken 2788 Bearing
    • Timken 368 Bearing
    • Timken 399a Bearing
    • 6208 rsr Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Deep Groove Ball Bearings
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
    • Thk Linear Guide
  • Technical Articles
  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
✖

Home

Stock Categories

Technical Articles

Fersa Bearing

Gamet Bearing

ILJIN Bearing

Contact Us