BEARING-SINGAPORE (PTE)LTD.
BEARING-SINGAPORE (PTE)LTD.
Fersa Bearing   Gamet Bearing   ILJIN Bearing  
English
English
  • Home
  • Stock Categories
    • Fersa Bearing
    • Gamet Bearing
    • ILJIN Bearing
    • JNS Bearing
    • KBC Bearing
    • LS Bearing
    • NMB Bearing
    • NTN-SNR Bearing
    • PFI Bearing
    • PSL Bearing
    • RHP Bearing
    • Ruville Bearing
    • Samick Bearing
    • SIGMA Bearing
    • SNFA Bearing
    • Screw-down Bearings
    • Air compressor bearing
    • Air Conditioning Magnetic Clutch bearing
    • Atlas air compressor bearing
    • Timken 2788 Bearing
    • Timken 368 Bearing
    • Timken 399a Bearing
    • 6208 rsr Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Deep Groove Ball Bearings
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
    • Thk Linear Guide
  • Technical Articles
  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
✖

Home

Stock Categories

Technical Articles

Fersa Bearing

Gamet Bearing

ILJIN Bearing

Home>Products>Thk Linear Guide>HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable

  • HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable
  • HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable

THK HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable

category

Thk Linear Guide

THK HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M Bearing SPECIFICATIONS

  • THK

  • HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M

  • 25 mm
  • 2170 kgf
  • 88.9 mm
  • 1120 kgf
  • Round
  • Contact with Flinger
  • Heavy Duty
  • 38 mm
Download THK HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M Spec Sheet
BEARING-SINGAPORE (PTE)LTD.

BEARING-SINGAPORE (PTE)LTD.China

  • BEARING-SINGAPORE (PTE)LTD.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable Details

  • 25 mm
  • 2170 kgf
  • 88.9 mm
  • 1120 kgf
  • Round
  • Contact with Flinger
  • Heavy Duty
  • 38 mm
  • Four-Bolt Flange
  • Lubrication Fitting
  • Cast Iron
  • UCFU300
  • Set Screw
  • UC305
  • Non-Expansion Bearing (Fixed)
HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable pdf

THK HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M Thk Linear Guide Description

Limiting speed700 r/min
H1104.775 mm
L361.95 mm
Basic dynamic load rating C311 kN
B116.681 mm
d2152.4 mm
A1121.047 mm
H213.519 mm
Mass bearing unit20.2 kg
J max.311.15 mm
J min.254 mm
H263.5 mm
da93.662 mm
Attachment bolt diameter G25.4 mm
S0.794 mm
s41.275 mm
A89.694 mm

OEM Thk Linear Guide inventory

No.BrandPBbOCdGL
1200SLPT1751NSK - 410 mm780 mm - 17 300 kN1 200 mm - -
1200SLPT1752NSK - 410 mm660 mm - 17 300 kN1 200 mm - -
1200Loyal - 9 mm - - 9 mm10 mm - -
1200KLTimken - 55,56 mm - - 48 kN50,8 mm27,98 mm4,76 mm
1200KLBTimken - 55,56 mm - - 48 kN50,8 mm27,98 mm4,76 mm
1200KLLTimken - 55,56 mm - - 48 kN50,8 mm27,98 mm4,76 mm
1200KLLBTimken - 55,56 mm - - 48 kN50,8 mm27,98 mm4,76 mm
1200KRTimken24,21 mm55,56 mm - 27,41 mm48 kN50,8 mm - 4,8 mm
1200KRRTimken24,21 mm55,56 mm - 27,41 mm48 kN50,8 mm - 4,8 mm
1200KRRBTimken24,21 mm55,56 mm - 27,41 mm48 kN50,8 mm - 4,8 mm
1200 TN9ISB - 9 mm - - 5,42 kN10 mm - -

 

HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L THK Separated Linear Guide Side Rails Set Model HRLimiting speed:700 r/min; H1:104.775 mm; L:361.95 mm; Basic dynamic load rating C:311 kN; B:116.681 mm; d2:152.4 mm; A1:121.047 mm; H:213.519 mm; Mass bearing unit:20.2 kg; J max.:311.15 mm; J min.:254 mm; H2:63.5 mm; da:93.662 mm; Attachment bolt diameter G:25.4 mm; S:0.794 mm; s:41.275 mm; A:89.69
HR2555M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[122-1000/1]LM THK Separated Linear Guide Side Rails Set Model HRd2 ≈:200 mm; Calculation factor Y2:2.9; G1:24 mm; Reference speed:1500 r/min; da min.:169 mm; Calculation factor e:0.35; Mass bearing + sleeve:56 kg; Calculation factor Y1:1.9; Basic dynamic load rating C:1680 kN; Fatigue load limit Pu:160 kN; D1 ≈:282 mm; Basic static load rating C0:196
HR2555M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[122-1000/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HRBasic dynamic load rating C:315 kN; Specific dynamic load factor K:100 N/mm²; l5 ≈:40 mm; d2 max.:162 mm; r1 min.:1 mm; l3 min.:80 mm; d4 ≈:92 mm; α:6 °; dk:92 mm; h1:200 mm; w:80 mm; G:M 56x4; Mass rod end:10.5 kg; Basic static load rating C0:530 kN; Material constant KM:330; B
HR2555T+[148-2600/1]L THK Separated Linear Guide Side Rails Set Model HRd:170 mm; with tapered bore:850 min-1; D:280 mm; Oil:199.840 kN; rs (min):2.1 mm; Static (Cor):8.3 mm; Pu:1150 kN; Grease:2090 kN; Dynamic (Cr):4.5 mm; with cylindrical bore:670 min-1; B:109 mm;
HR2555M+[122-1000/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HROil:765.770 kN; B:226 mm; Pu:5600 kN; Static (Cor):22.3 mm; d:440 mm; D:720 mm; Dynamic (Cr):12 mm; with tapered bore:530 min-1; with cylindrical bore:430 min-1; Grease:10640 kN; rs (min):6 mm;
HR2555T+[148-2600/1]L[H,​P,​SP,​UP] THK Separated Linear Guide Side Rails Set Model HRFatigue load limit Pu:670 kN; B:226 mm; Basic static load rating C0:10000 kN; Basic dynamic load rating C:6215 kN; b:22.3 mm; D1 ≈:632 mm; Da max.:694 mm; Reference speed:450 r/min; Calculation factor Y2:3.4; Mass bearing + sleeve:380 kg; da min.:456 mm; K:12 mm; Limiting speed:850 r/min; B1:2
HR2555T+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HRSealed Speed Rating n3:2600 rpm; Oil Speed Rating Open/Shielded n2:4500 rpm; Basic Dynamic Radial Load Rating C:95600 N; D:160.0000 mm; Grease Speed Rating n1:3800 rpm; d:90.000 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; Fillet Radius ra:2.00 mm; B:30.00 mm; Accessories:Without Accessories;
HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[H,​P,​SP,​UP] THK Separated Linear Guide Side Rails Set Model HRCalculation factor Y1:3; d2 ≈:199 mm; r1,2 min.:2.1 mm; da max.:199 mm; Ba min.:9 mm; Mass bearing + sleeve:23.2 kg; db min.:189 mm; Basic dynamic load rating C:884 kN; B2:34 mm; Fatigue load limit Pu:114 kN; Da max.:269 mm; Basic static load rating C0:1270 kN; B:74 mm; K:7.5 mm; ra max.:2 mm;
HR2555M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[122-1000/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HRB:71.40 mm; Accessories:Shield & Seal & Snap; Grease Speed Rating n1:2600 rpm; Basic Dynamic Radial Load Rating C:187000 N; Basic Static Radial Load Rating Co:208000 N; D:160.0000 mm; Oil Speed Rating n2:3600 rpm; d:75.000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2600 rpm;
HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HRG:Tr 280x4; G1:30 mm; G2:G 1/4; B2:213 mm; Hydraulic nut:HMV 56 E; d:260 mm; Mass withdrawal sleeve:19 kg; B1:205 mm; d1:240 mm; A:9 mm;
HR2555[F(AP-C),​F(AP-CF),​F(AP-HC)]+[122-2600/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HRBasic Dynamic Radial Load Rating C:42300 N; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:35500 N; Accessories:Shield & Seal; D:115.0000 mm; B:20.00 mm; Grease Speed Rating Open/Shielded n1:5600 rpm; Sealed Speed Rating n3:3400 rpm; d:75.000 mm; Oil Speed Rating Open/Shielded n2:6700
HR2555M+[122-1000/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HRC:19 mm; B:42.9 mm; Thread grub screw G2:5/16-24 UNF; Fatigue load limit Pu:0.655 kN; Recommended tightening torque for grub screw:6.5 N·m; Basic static load rating C0:15.3 kN; Limiting speed1):1100 r/min; D:72 mm; s1:25.4 mm; r1,2 min.:1 mm; Basic dynamic load rating C:25.5 kN; B4:6 mm; Mass
HR2555M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[122-1000/1]L[H,​P,​SP,​UP]M THK Separated Linear Guide Side Rails Set Model HRB:39.00 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; d:80.000 mm; Grease Speed Rating n1:3800 rpm; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:4500 rpm; Basic Static Radial Load Rating Co:86500 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4500 rpm; D:170.0000 mm; Basic Dynamic
HR2555M+[122-1000/1]L[H,​P,​SP,​UP]M THK Separated Linear Guide Side Rails Set Model HRBasic Dynamic Radial Load Rating C:88400 N; B:28.00 mm; D:210.0000 mm; Accessories:One Seal; Basic Static Radial Load Rating Co:93000 N; Grease Speed Rating Open/Shielded n1:2800 rpm; Sealed Speed Rating n3:1800 rpm; d:150.000 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; Fillet Radius ra:2.00 mm;
HR2555M+[122-1000/1]LM THK Separated Linear Guide Side Rails Set Model HRN1:22.225 mm; Housing:SAF 028 KA; P180°:81.4 kN; Cap bolt:2 x 1-8 UNC; Taconite seal:TER 122; J max.:368.3 mm; Mass pillow block:62.6 kg; A1:120.65 mm; da:125.412 mm; J1:69.85 mm; P60°:185 kN; ba:53.975 mm; End plug (suffix Y):EPR 27; H2:53.975 mm; Cap bolt, SAE grade:8; Pa:22.2 kN; H1:133.3
HR2555T+[148-2600/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HRBasic static load rating C0:270 kN; Basic dynamic load rating C:208 kN; C:24 mm; d:90 mm; d1 ≈:115 mm; Da min.:125 mm; D:140 mm; ra max.:2 mm; Db min.:134 mm; r3,4 min.:1.5 mm; B:32 mm; da max.:100 mm; rb max.:1.5 mm; r1,2 min.:2 mm; a:29.649 mm; T:32 mm; Limiting speed:4300 r/min; db min.:101

 

 

HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable Video

 

THK HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M INTERCHANGE

Thk Linear Guide Part series HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M is a potential replacement for these common bearing part numbers:

  • HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M

  • HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M

  • HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M

  • HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M

  • HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M

  • HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M

  • HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M

  • HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M

Contact Us

BEARING-SINGAPORE (PTE)LTD.
AddressRm.727, 5, Jungang-Daero 775 Beon-Gil, Busanjin-Gu, Busan, 47221, Korea
Phone(Working Time)82-2-220-3666
Fax
  • BEARING-SINGAPORE (PTE)LTD.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

THK HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M Technical Articles

Are wheel bearings hard to replace?
How hard is it to change a wheel bearing? : MechanicAdviceJun 6, 2018 — How hard is it to change a wheel bearing? 2002 Silverado. Im not a mechanic but i can usually figure most things out on my own. I  How to Replace a Front Wheel...
Can a bad axle sound like a bad wheel bearing?
CV joint or Bearing? - Maintenance/Repairs - Car TalkJul 4, 2016 — The noise reminds me of a bad wheel bearing or a tire problem. The faster you go the more The CV joint half shaft does seem a bit loose. But as I recall, a failing This sounds...
How do you fasten a bearing?
Bearing installation and removal basics | Processing MagazineNov 9, 2017 — Installing a radial ball or roller bearing properly is critical to achieve the full service life of the component. Never attach a pipe to the handle MiHow2 - Koyo -...

Thk Linear Guide CATEGORIES

  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
  • JNS Bearing
  • KBC Bearing
  • LS Bearing
  • NMB Bearing
  • NTN-SNR Bearing
  • PFI Bearing
  • PSL Bearing
  • RHP Bearing
  • Ruville Bearing
  • Samick Bearing
  • SIGMA Bearing
  • SNFA Bearing
  • Screw-down Bearings
  • Air compressor bearing
  • Air Conditioning Magnetic Clutch bearing
  • Atlas air compressor bearing
  • Timken 2788 Bearing
  • Timken 368 Bearing
  • Timken 399a Bearing
  • 6208 rsr Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Kaydon Slewing Bearing
  • Bearing Slewing Ring
  • Single-Row Cylindrical Roller Bearings
  • Single-Row Deep Groove Ball Bearings
  • Deep Groove Ball Bearings
  • Cylindrical Roller Bearings
  • Bearings For Metric And Inch Shaft Sizes
  • Thk Miniature Linear Guide
  • Thk Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • Thk Linear Bearings And Rails
  • Thk Linear Motion
  • Thk Linear Guide
More

Customers Who Viewed THK HRW27CR[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]M+[86-1200/1]L[H,​P,​SP,​UP]M Bearing Also Viewed

  • HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[H,​P,​SP,​UP] THK Separated Linear Guide Side Rails Set Model HR
  • HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR
  • HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L THK Separated Linear Guide Side Rails Set Model HR
  • HR2555T+[148-2600/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR
  • HR2555T+[148-2600/1]L[H,​P,​SP,​UP] THK Separated Linear Guide Side Rails Set Model HR
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

BEARING-SINGAPORE (PTE)LTD.. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Fersa Bearing
    • Gamet Bearing
    • ILJIN Bearing
    • JNS Bearing
    • KBC Bearing
    • LS Bearing
    • NMB Bearing
    • NTN-SNR Bearing
    • PFI Bearing
    • PSL Bearing
    • RHP Bearing
    • Ruville Bearing
    • Samick Bearing
    • SIGMA Bearing
    • SNFA Bearing
    • Screw-down Bearings
    • Air compressor bearing
    • Air Conditioning Magnetic Clutch bearing
    • Atlas air compressor bearing
    • Timken 2788 Bearing
    • Timken 368 Bearing
    • Timken 399a Bearing
    • 6208 rsr Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Deep Groove Ball Bearings
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
    • Thk Linear Guide
  • Technical Articles
  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
✖

Home

Stock Categories

Technical Articles

Fersa Bearing

Gamet Bearing

ILJIN Bearing

Contact Us