BEARING-SINGAPORE (PTE)LTD.
BEARING-SINGAPORE (PTE)LTD.
Fersa Bearing   Gamet Bearing   ILJIN Bearing  
English
English
  • Home
  • Stock Categories
    • Fersa Bearing
    • Gamet Bearing
    • ILJIN Bearing
    • JNS Bearing
    • KBC Bearing
    • LS Bearing
    • NMB Bearing
    • NTN-SNR Bearing
    • PFI Bearing
    • PSL Bearing
    • RHP Bearing
    • Ruville Bearing
    • Samick Bearing
    • SIGMA Bearing
    • SNFA Bearing
    • Screw-down Bearings
    • Air compressor bearing
    • Air Conditioning Magnetic Clutch bearing
    • Atlas air compressor bearing
    • Timken 2788 Bearing
    • Timken 368 Bearing
    • Timken 399a Bearing
    • 6208 rsr Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Deep Groove Ball Bearings
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
    • Thk Linear Guide
  • Technical Articles
  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
✖

Home

Stock Categories

Technical Articles

Fersa Bearing

Gamet Bearing

ILJIN Bearing

Home>Products>NMB Bearing>3,175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove ball bearings

  • 3,175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove ball bearings
  • 3,175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove ball bearings
  • 3,175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove ball bearings
  • 3,175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove ball bearings

NMB RIF-418 MODELS

Need a CAD or 3D Model?

What is RIF-418 bearing cross reference？
Contact NowWhatsAppBe Our Agent

3,175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove ball bearings

category

NMB Bearing

NMB RIF-418 Bearing SPECIFICATIONS

  • With over 10170 full-service stores, our 3,175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove ball bearings inventory is extensive and our parts are priced Concentric Collar locking device: right. within 24 hours. 3,175 mm x 6,35 mm x 2,38 mm This helps you maximize your productivity by saving time and BEARING-SINGAPORE (PTE)LTD. your hard-earned dollars.

  • NMB

  • RIF-418

  • HM231100
  • HM231149
  • Imperial
  • Stamped Steel
  • 234000 lbf
  • 60600 lbf
  • 5.8750 in
  • 2.2300 in
BEARING-SINGAPORE (PTE)LTD.

BEARING-SINGAPORE (PTE)LTD.China

  • BEARING-SINGAPORE (PTE)LTD.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

3,175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove ball bearings Technology

  • HM231100
  • HM231149
  • Imperial
  • Stamped Steel
  • 234000 lbf
  • 60600 lbf
  • 5.8750 in
  • 2.2300 in
  • 0.14 in
  • 6.42 in
  • 6.57 in
  • 0.19 in
  • 0.14 in
  • -0.45 in
  • 34800 lbf
  • 134000 lbf
  • 210000 lbf
  • 19000 lbf
  • 1.83
  • 533
  • 85.9
  • 0.133

NMB RIF-418 Specifications for 3,175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove ball bearings

Sponsored products related to 3,175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove ball bearings

No.BrandHWBCmdTD
10418 MSIGMA - - 54 mm54 mm - 90 mm - 225 mm
20NQ3418DKOYO - - - 21.1 kN - 20 - 34 mm
5418Ruville - - - - - - - -
25VS3418PKOYO - - 17,7 mm - - 25 - 34
XTGB41842R01SNR - - - 69 mm - 32 mm - 142 mm
234418ISB60 mm - - 60 kN - 90 mm - 140 mm
234418 MSPLoyal - - - 61 kN - 90 mm60 mm140 mm
234418-M-SPFAG - - 60 mm30 mm2,45 kg / Weight90 mm - 140 mm
234418BKOYO - 8 mm15 mm67,4 kN - 90 mm60 mm140 mm
6418Ruville - - - - - - - -
WJ-141816Timken - - - 29,2 kN - 22,225 - 28,575

 

12 mm x 25 mm x 12 mm NMB MBG12CR plain bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;
6,35 mm x 15,875 mm x 4,978 mm NMB RF-4HH deep groove ball bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;
22 mm x 52 mm x 22 mm NMB HR22 plain bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;
9 mm x 24 mm x 7 mm NMB 609 deep groove ball bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;
12 mm x 25 mm x 12 mm NMB MBT12 plain bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;
10 mm x 26 mm x 10 mm NMB RBT10E plain bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;
8 mm x 16 mm x 5 mm NMB LF-1680DD deep groove ball bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;
3 mm x 6 mm x 2 mm NMB LF-630 deep groove ball bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;
28 mm x 50 mm x 28 mm NMB MBT28 plain bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;
6 mm x 19 mm x 6 mm NMB 626SS deep groove ball bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;
1,397 mm x 4,762 mm x 2,779 mm NMB RIF-3ZZ deep groove ball bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;
3,175 mm x 7,938 mm x 3,571 mm NMB RIF-518ZZ deep groove ball bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;
10 mm x 19 mm x 5 mm NMB L-1910 deep groove ball bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;
4 mm x 9 mm x 2,5 mm NMB LF-940 deep groove ball bearingsSeries:HM231100; Cone Part Number:HM231149; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:234000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:60600 lbf; d:5.8750 in; B - Cone Width:2.2300 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:6.42 in; db - Cone Backface Backing Diameter:6.57 in; Ab - Cage-Cone Frontface Clearance:0.19 in; Aa - Cage-Cone Backface Clearance:0.14 in; a - Effective Center Location4:-0.45 in; C90 - Dynamic Radial Rating (90 million revolutions)5:34800 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:134000 lbf; C0 - Static Radial Rating:210000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19000 lbf; K - Factor8:1.83; G1 - Heat Generation Factor (Roller-Raceway):533; G2 - Heat Generation Factor (Rib-Roller End):85.9; Cg - Geometry Factor:0.133;

 

 

3,175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove ball bearings Video

 

3,175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove

Size. 3.175x6.35x2.38 mm. Bore Diameter. 3,175 mm. Outer Diameter. 6,35 mm. Width. 2,38 mm d. 3,175 mm. D. 6,35 mm. B. 2,38 mm. C. 2,38 mm r min

Bearing RIF-418 (NMB) | Size and Specification | Bearings Online

Deep groove ball bearings RIF-418. Bearing number : RIF-418. Size (mm) : 3.175x6.35x2.38. Brand : NMB. Bore Diameter (mm) : 3,175. Outer Diameter (mm) : 6 

Buy 3,175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove ball

Request A Concentric Collar locking device: Quote For Your Special 3175 mm x 6,35 mm x 2,38 mm NMB RIF-418 deep groove ball bearings Needs Today!

RIF-418 Flanged Open Miniature Ball Bearings | NMB

Print these specs. Category. Inch Series Bearings. Part Number. RIF-418. Inch. Flanged Open. Bore Diameter. 3.175 [mm]. Outside Diameter. 6.350 [mm]. Width

NMB RIF-418 Bearing | Model：RIF-418

ミニチュアボールベアリング NMB・NHBB インチサイズベアリング RIF418 6350mm (02500inch) 4763mm (01875inch) 2380mm (00937inch) \1310 RIF418ZZ 

3,175 mm x 6,35 mm x 2,779 mm NMB RIF-418ZZ deep groove ball

Brand Name: NMB. Model Number: RIF-418ZZ. Grease: 17 000 min-1. B: 11 mm. Static (Cor):, 4.875 kN. a: 12 mm. r1s (min):, 0.3 mm. d: 15 mm. Dynamic (Cr): 

NMB Bearing Part Numbering from National Precision Bearing

The NMB Part Numbering System is composed of the part number and specification. Minebea has ... RI-: General Inch type; (R-): * Used for some of the Inch type; RIF-: Flanged type. Thrust ball bearing. T- ... 418: OD 4/16 Inch Bore 1/8 Inch

RIF-418ZZ Datasheet -- NMB Technologies Corporation

Learn more about RIF-418ZZ Inch Series Bearings with the part specifications here to decide if it is the ideal ball bearing for your application. NMB is the world's 

NMB RIF-418 INTERCHANGE

NMB Bearing Part series RIF-418 is a potential replacement for these common bearing part numbers:

  • RIF-418

  • RIF-418

  • RIF-418

  • RIF-418

  • RIF-418

  • RIF-418

  • RIF-418

  • RIF-418

Contact Us

BEARING-SINGAPORE (PTE)LTD.
AddressRm.727, 5, Jungang-Daero 775 Beon-Gil, Busanjin-Gu, Busan, 47221, Korea
Phone(Working Time)82-2-220-3666
Fax
  • BEARING-SINGAPORE (PTE)LTD.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

NMB RIF-418 Technical Articles

Are wheel bearings hard to replace?
How hard is it to change a wheel bearing? : MechanicAdviceJun 6, 2018 — How hard is it to change a wheel bearing? 2002 Silverado. Im not a mechanic but i can usually figure most things out on my own. I  How to Replace a Front Wheel...
Can a bad axle sound like a bad wheel bearing?
CV joint or Bearing? - Maintenance/Repairs - Car TalkJul 4, 2016 — The noise reminds me of a bad wheel bearing or a tire problem. The faster you go the more The CV joint half shaft does seem a bit loose. But as I recall, a failing This sounds...
How do you fasten a bearing?
Bearing installation and removal basics | Processing MagazineNov 9, 2017 — Installing a radial ball or roller bearing properly is critical to achieve the full service life of the component. Never attach a pipe to the handle MiHow2 - Koyo -...

NMB Bearing CATEGORIES

  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
  • JNS Bearing
  • KBC Bearing
  • LS Bearing
  • NMB Bearing
  • NTN-SNR Bearing
  • PFI Bearing
  • PSL Bearing
  • RHP Bearing
  • Ruville Bearing
  • Samick Bearing
  • SIGMA Bearing
  • SNFA Bearing
  • Screw-down Bearings
  • Air compressor bearing
  • Air Conditioning Magnetic Clutch bearing
  • Atlas air compressor bearing
  • Timken 2788 Bearing
  • Timken 368 Bearing
  • Timken 399a Bearing
  • 6208 rsr Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Kaydon Slewing Bearing
  • Bearing Slewing Ring
  • Single-Row Cylindrical Roller Bearings
  • Single-Row Deep Groove Ball Bearings
  • Deep Groove Ball Bearings
  • Cylindrical Roller Bearings
  • Bearings For Metric And Inch Shaft Sizes
  • Thk Miniature Linear Guide
  • Thk Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • Thk Linear Bearings And Rails
  • Thk Linear Motion
  • Thk Linear Guide
More

Customers Who Viewed NMB RIF-418 Bearing Also Viewed

  • 1,397 mm x 4,762 mm x 2,779 mm NMB RIF-3ZZ deep groove ball bearings
  • 12 mm x 25 mm x 12 mm NMB MBT12 plain bearings
  • 3 mm x 6 mm x 2 mm NMB LF-630 deep groove ball bearings
  • 28 mm x 50 mm x 28 mm NMB MBT28 plain bearings
  • 10 mm x 26 mm x 10 mm NMB RBT10E plain bearings
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

BEARING-SINGAPORE (PTE)LTD.. Copyright © 2017 - 2025 All Rights Reserved.

  • Home
  • Stock Categories
    • Fersa Bearing
    • Gamet Bearing
    • ILJIN Bearing
    • JNS Bearing
    • KBC Bearing
    • LS Bearing
    • NMB Bearing
    • NTN-SNR Bearing
    • PFI Bearing
    • PSL Bearing
    • RHP Bearing
    • Ruville Bearing
    • Samick Bearing
    • SIGMA Bearing
    • SNFA Bearing
    • Screw-down Bearings
    • Air compressor bearing
    • Air Conditioning Magnetic Clutch bearing
    • Atlas air compressor bearing
    • Timken 2788 Bearing
    • Timken 368 Bearing
    • Timken 399a Bearing
    • 6208 rsr Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Deep Groove Ball Bearings
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
    • Thk Linear Guide
  • Technical Articles
  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
✖

Home

Stock Categories

Technical Articles

Fersa Bearing

Gamet Bearing

ILJIN Bearing

Contact Us