BEARING-SINGAPORE (PTE)LTD.
BEARING-SINGAPORE (PTE)LTD.
Fersa Bearing   Gamet Bearing   ILJIN Bearing  
English
English
  • Home
  • Stock Categories
    • Fersa Bearing
    • Gamet Bearing
    • ILJIN Bearing
    • JNS Bearing
    • KBC Bearing
    • LS Bearing
    • NMB Bearing
    • NTN-SNR Bearing
    • PFI Bearing
    • PSL Bearing
    • RHP Bearing
    • Ruville Bearing
    • Samick Bearing
    • SIGMA Bearing
    • SNFA Bearing
    • Screw-down Bearings
    • Air compressor bearing
    • Air Conditioning Magnetic Clutch bearing
    • Atlas air compressor bearing
    • Timken 2788 Bearing
    • Timken 368 Bearing
    • Timken 399a Bearing
    • 6208 rsr Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Deep Groove Ball Bearings
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
    • Thk Linear Guide
  • Technical Articles
  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
✖

Home

Stock Categories

Technical Articles

Fersa Bearing

Gamet Bearing

ILJIN Bearing

Home>Products>High Temperature Linear Guide>HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable

  • HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable
  • HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable

THK HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable

category

High Temperature Linear Guide

THK HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M Bearing SPECIFICATIONS

  • THK

  • HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M

  • Flange Block
  • 0.0
  • N/A
  • 2.86
  • M06110
  • 4
  • Set Screw
  • 4 Bolt Round Flange Cartridge
Download THK HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M Spec Sheet
BEARING-SINGAPORE (PTE)LTD.

BEARING-SINGAPORE (PTE)LTD.China

  • BEARING-SINGAPORE (PTE)LTD.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable Details

  • Flange Block
  • 0.0
  • N/A
  • 2.86
  • M06110
  • 4
  • Set Screw
  • 4 Bolt Round Flange Cartridge
  • Ball Bearing
  • Cast Iron
  • Non-expansion
  • 1/2 Inch
  • Yes
  • UG227NL
  • Single Lip Contact
  • 1 Piece Solid
  • With Pilot
  • Inch
  • 4 Bolt Round Flange Cartridge; 1-11/16" Bore; 5.1" Bolt Circle; 3.6" Bolt Spacing; 1 Piece Solid; Set Screw Mount; Cast Iron; Ball Bearing; 2-1/32" Length Thru Bore; Relubricatable
  • Single Row | Spherical | Standard Duty | Wide Inner Race | Closed End
  • 31171501
  • 8483.20.40.40
  • Bearing
  • Flanged
  • FC3U227NC
  • 5802870
  • 6.3
  • 3.6 Inch | 91.9 Millimeter
  • 1.688 Inch | 42.875 Millimeter
  • 2.031 Inch | 51.6 Millimeter
  • 0.469 Inch | 11.9 Millimeter
  • 5.1 Inch | 130 Millimeter
  • 4.25 Inch | 107.95 Millimeter
HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable pdf

THK HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M High Temperature Linear Guide Description

Basic Static Radial Load Rating Co270000 N
D360.0000 mm
AccessoriesWithout Accessories
d260.000 mm
B46.00 mm
Basic Dynamic Radial Load Rating C212000 N
Grease Speed Rating Open/Shielded n11600 rpm
Oil Speed Rating Open/Shielded n21900 rpm
Sealed Speed Rating n31000 rpm
Fillet Radius ra2.00 mm

How to use this High Temperature Linear Guide guide

No.BrandSdHUeTaD
ZK.22.1000.100-1SNISB - 830 mm82 mm934 mm6 mm - 884 mm1000 mm
ZK.22.1000.100-1SPPNISB - 830 mm82 mm934 mm6 mm - 884 mm1000 mm
100031X/100072Gamet - 31.75 mm - - - 24,25 mm - 72 mm
100031X/100072CGamet - 31.75 mm - - - 24,25 mm - 72 mm
100031X/100072GGamet - 31.75 mm - - - 57 mm - 72 mm
100031X/100072HGamet - 31.75 mm4 mm - - 57 mm - 72 mm
100031X/100072PGamet25,75 mm31.75 mm - - - 51,75 mm - 72 mm
100031X/100076XGamet - 31.75 mm - - - 24,25 mm - 76,2 mm
100031X/100076XCGamet - 31.75 mm - - - 24,25 mm - 76,2 mm
100031X/100076XGGamet - 31.75 mm - - - 57 mm - 76,2 mm
100031X/100076XHGamet - 31.75 mm4 mm - - 57 mm - 76,2 mm

 

3CSR30C[0,​1]+[134-3000/1]/[134-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block SetB:56.00 mm; Oil Speed Rating Open/Shielded n2:1600 rpm; Fillet Radius ra:3.00 mm; Sealed Speed Rating n3:800 rpm; D:420.0000 mm; Basic Dynamic Radial Load Rating C:270000 N; d:300.000 mm; Grease Speed Rating Open/Shielded n1:1300 rpm; Basic Static Radial Load Rating Co:375000 N; Accessories:Without
2CSR45C[0,​1]+[188-3090/1]/[188-3090/1]L[P,​SP,​UP] THK Cross-Rail Guide Block SetD:170 mm; ra1 (max):2 mm; dc (min):105 mm; Limiting Speed - Grease:3,200 rpm; Static Load Rating:430,000 N; Limiting Speed - Oil:4,000 rpm; db (min):92 mm; d:80 mm; B:58 mm; Enclosure:Open; Fillet Radius/Chamfer:2.1 mm; dd (min):114 mm; Radial Clearance:0.065 to 0.100 mm; Inside Ring Outside Diamete
3CSR25C[0,​1]+[116-3000/1]/[116-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block SetRadial Clearance:0.030 to 0.058 mm; Weight:1.790 kg; B:28 mm; Bore Type:Cylindrical Bore; ra (max):2 mm; Configuration:Single Row; Enclosure:Double Seal; Factor fo:14.5; da (min):95 mm; Dynamic Load Rating:84,000 N; Da (max):140 mm; Limiting Speed - Grease:2,800 rpm; Static Load Rating:62,000 N; Fil
3CSR15+[64-2500/1]/[64-2500/1]L[P,​SP,​UP] THK Cross-Rail Guide Block SetBore Type:Cylindrical Bore; Configuration:Double Row; Static Load Rating:101,000 N; D:130 mm; Da:118 mm; Cy:6.5 mm; Limiting Speed - Grease:3,800 rpm; Enclosure:Snap Ring Groove wit; B:54 mm; Dx:141.5 mm; da:72 mm; Fillet Radius/Chamfer:2.1 mm; Limiting Speed - Oil:5,000 rpm; Dynamic Load Rating:128
3CSR20C[0,​1]+[103-3000/1]/[103-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block Setr1:2.1 mm; db (min):92 mm; Configuration:Single Row; Limiting Speed - Grease:3,600 rpm; Da (max):158 mm; Dynamic Load Rating:190,000 N; ra1 (max):2 mm; Enclosure:Open; Inside Ring Outside Diameter:103 mm; dd (min):114 mm; Radial Clearance:0.065 to 0.100 mm; ra (max):2 mm; d:80 mm; B:39 mm; Static Lo
3CSR20SC[0,​1]+[87-3000/1]/[87-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block SetGroove Width A:40 mm; Axial Load Factor Y1:3.01; Configuration:Double Row; D:980 mm; Fillet Radius/Chamfer:7.5 mm; Weight:603.000 kg; Limiting Speed - Oil:510 rpm; Roller Profile:Symmetric; Hole Diameter (do):20 mm; Center Guidance:Fixed Inner Ring Rib; ra (max):6 mm; Enclosure:Open; B:230 mm; Nr. o
3CSR20+[103-3000/1]/[103-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block SetB:0.6250 in; Fillet Radius ra:0.06 in; d:2.250 in; Grease Speed Rating n1:7100 rpm; Oil Speed Rating n2:14000 rpm; D:3.5625 in; Basic Static Radial Load Rating Co:27000 N; Basic Dynamic Radial Load Rating C:31200 N; Fillet Radius rb:0.024 in;
3CSR25+[116-3000/1]/[116-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block Setra (max):1 mm; Bore Type:Cylindrical Bore; a (max):2.1 mm; Snap Ring Width:1.1 mm; D1 (max):122.6 mm; D:125 mm; Dynamic Load Rating:19,600 N; Snap Ring Outside Diameter:130.7 mm; Dx (min):132 mm; Limiting Speed - Grease:4,800 rpm; Da (max):120 mm; Radial Clearance:0.030 to 0.058 mm; B:13 mm; Configu
3CSR25SC[0,​1]+[97-3000/1]/[97-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block SetFillet Radius rb:1.00 mm; B:74.00 mm; Shielded or Sealed Co2:114000 N; Width Plain C2:146000 N; Fillet Radius ra:2.00 mm; d:75.000 mm; D:160.0000 mm; Basic Dynamic Radial Load Rating 40º C1:159000 N; Basic Static Radial Load Rating 15º Co1:150000 N; Grease Speed Rating n1:3600 rpm; Oil Spe
3CSR15C1+[64-2500/1]/[64-2500/1]L[P,​SP,​UP] THK Cross-Rail Guide Block SetOil Speed Rating n2:17000 rpm; Fillet Radius ra:1.00 mm; d:65.000 mm; Grease Speed Rating n1:11000 rpm; B:36.00 mm; Basic Dynamic Radial Load Rating C:58500 N; Basic Static Radial Load Rating Co:64000 N; Fillet Radius rb:0.60 mm; D:100.0000 mm;
3CSR20S+[87-3000/1]/[87-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block SetFillet Radius/Chamfer:1.1 mm; Dynamic Load Rating:30,500 N; Bore Type:Cylindrical Bore; Weight:0.438 kg; B:18 mm; Da (max):94 mm; Radial Clearance:0.023 to 0.043 mm; D:100 mm; Enclosure:Double Seal; Static Load Rating:25,200 N; ra (max):1 mm; Configuration:Single Row; d:65 mm; Factor fo:15.7; Limiti
3CSR25S+[97-3000/1]/[97-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block SetWeight:0.186 kg; Bore Type:Cylindrical Bore; Dynamic Load Rating:16,800 N; ra (max):1 mm; Limiting Speed - Oil:12,000 rpm; Da (max):63 mm; a (max):2.5 mm; D1 (max):64.8 mm; Fillet Radius/Chamfer:1 mm; Cy (max):3.8 mm; Radial Clearance:0.015 to 0.033 mm; r1:0.5 mm; Dx (min):76 mm; D:68 mm; B:15 mm; F

 

 

HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M THK Linear Guide Wide Rail HRW Accuracy and Preload Selectable Video

 

THK HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M INTERCHANGE

High Temperature Linear Guide Part series HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M is a potential replacement for these common bearing part numbers:

  • HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M

  • HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M

  • HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M

  • HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M

  • HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M

  • HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M

  • HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M

  • HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M

Contact Us

BEARING-SINGAPORE (PTE)LTD.
AddressRm.727, 5, Jungang-Daero 775 Beon-Gil, Busanjin-Gu, Busan, 47221, Korea
Phone(Working Time)82-2-220-3666
Fax
  • BEARING-SINGAPORE (PTE)LTD.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

THK HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M Technical Articles

Are wheel bearings hard to replace?
How hard is it to change a wheel bearing? : MechanicAdviceJun 6, 2018 — How hard is it to change a wheel bearing? 2002 Silverado. Im not a mechanic but i can usually figure most things out on my own. I  How to Replace a Front Wheel...
Can a bad axle sound like a bad wheel bearing?
CV joint or Bearing? - Maintenance/Repairs - Car TalkJul 4, 2016 — The noise reminds me of a bad wheel bearing or a tire problem. The faster you go the more The CV joint half shaft does seem a bit loose. But as I recall, a failing This sounds...
How do you fasten a bearing?
Bearing installation and removal basics | Processing MagazineNov 9, 2017 — Installing a radial ball or roller bearing properly is critical to achieve the full service life of the component. Never attach a pipe to the handle MiHow2 - Koyo -...

High Temperature Linear Guide CATEGORIES

  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
  • JNS Bearing
  • KBC Bearing
  • LS Bearing
  • NMB Bearing
  • NTN-SNR Bearing
  • PFI Bearing
  • PSL Bearing
  • RHP Bearing
  • Ruville Bearing
  • Samick Bearing
  • SIGMA Bearing
  • SNFA Bearing
  • Screw-down Bearings
  • Air compressor bearing
  • Air Conditioning Magnetic Clutch bearing
  • Atlas air compressor bearing
  • Timken 2788 Bearing
  • Timken 368 Bearing
  • Timken 399a Bearing
  • 6208 rsr Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Kaydon Slewing Bearing
  • Bearing Slewing Ring
  • Single-Row Cylindrical Roller Bearings
  • Single-Row Deep Groove Ball Bearings
  • Deep Groove Ball Bearings
  • Cylindrical Roller Bearings
  • Bearings For Metric And Inch Shaft Sizes
  • Thk Miniature Linear Guide
  • Thk Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • Thk Linear Bearings And Rails
  • Thk Linear Motion
  • Thk Linear Guide
More

Customers Who Viewed THK HRW21CA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​UU,​ZZ]M+[72-1000/1]L[H,​P,​SP,​UP]M Bearing Also Viewed

  • 3CSR30C[0,​1]+[134-3000/1]/[134-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block Set
  • 3CSR25S+[97-3000/1]/[97-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block Set
  • 3CSR25SC[0,​1]+[97-3000/1]/[97-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block Set
  • 3CSR25+[116-3000/1]/[116-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block Set
  • 3CSR25C[0,​1]+[116-3000/1]/[116-3000/1]L[P,​SP,​UP] THK Cross-Rail Guide Block Set
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

BEARING-SINGAPORE (PTE)LTD.. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Fersa Bearing
    • Gamet Bearing
    • ILJIN Bearing
    • JNS Bearing
    • KBC Bearing
    • LS Bearing
    • NMB Bearing
    • NTN-SNR Bearing
    • PFI Bearing
    • PSL Bearing
    • RHP Bearing
    • Ruville Bearing
    • Samick Bearing
    • SIGMA Bearing
    • SNFA Bearing
    • Screw-down Bearings
    • Air compressor bearing
    • Air Conditioning Magnetic Clutch bearing
    • Atlas air compressor bearing
    • Timken 2788 Bearing
    • Timken 368 Bearing
    • Timken 399a Bearing
    • 6208 rsr Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Deep Groove Ball Bearings
    • Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
    • Thk Linear Guide
  • Technical Articles
  • Fersa Bearing
  • Gamet Bearing
  • ILJIN Bearing
✖

Home

Stock Categories

Technical Articles

Fersa Bearing

Gamet Bearing

ILJIN Bearing

Contact Us